Tormek SVM-140 Long Knife Jig
Price: $ 47.00
5(158)
Knife Making Supplies - Best prices, selection and service. Visit us Today!1.
Tormek SVM-140 Long Knife Jig
**Please note these will be dropped shipped to you directly from Tormek**
The Tormek original grinding jig SVM-140 has been developed especially for long and flexible knives, e.g. fillet knives. It's larger width, 140 mm (5½), stabilizes a long and thin blade and the jig copes with blades longer than 160 mm (6¼).
A Durable Edge: Compared to grinding methods where you quickly pull the knife through a knife sharpener or sharpen it by using a honing stone, the Tormek knife jigs restore the blade to its original and optimal edge angle. So you do not just sharpen or hone at the very tip of the edge, as you do with honing stones or with a sharpening steel, which causes the edge angle to increase unintentionally. After a few sharpenings by hand, the edge sooner or later will need to be restored to the correct edge angle.
Kind to the steel: Since the edge is continuously cooled with water, there is no risk that the steel will become overheated and lose its hardness. You remove the minimum amount of steel so your valuable knives will last for a long time.
Superior sharpness: The jig rests on the Universal Support and gives you full control over the edge angle. The burr that develops during sharpening is easily removed on the Tormek Leather Honing Wheel where it is polished to a razor edge. You get a superior sharpness that will last longer.
Edge angles for different usage: You can set a suitable edge angle by using the Tormek AngleMaster that comes with the machine. A knife for cutting meat should have a larger edge angle then a knife for cutting vegetables. A small edge angle (25°) will cut easily but it will also be more sensitive to wear and damage. A larger edge angle (40°) will give a stronger and more durable edge.
Design: This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades.
The jig comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3). You lock the tool by tightening the knob (4).
The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is placed vertically for grinding towards the edge.
Click here for more information!
Tormek Axe jig SVA-170 on Vimeo
Tormek KJ-140 Wide Centering Knife Jig – Advanced Machinery
null
Tormek Wide Centering Knife Jig KJ-140 clamp for long knives
Tormeks T-8 10 Sharpening System can sharpen virtually any knife or edged tool, including knives, scissors, axes, chisels, plane irons, drill bits and more. Aluminum-oxide grindstone sits over a large water trough that can be raised and lowered, so you can minimize splashing. Thanks to the water-cooling system and slow running speed, you maintain complete control over the edge without risking the steels temper.
Tormek T-8 Sharpening System
Tormek SVM-140 - Long Knife Jig
Premium Woodworking Tool - Tormek SVM-140 Long Knife Jig, Greenside
O-Ring for SVM-45 / SVM140 Knife Jigs
SVM-00 Small Knife Holder - Tormek
What's your favorite Tormek jig? If there's one you're missing, there's just a few days left to save 10% on all Tormek jigs, accessories…
null
Tormek Wide Centering Knife Jig KJ-140 clamp for long knives
NEW: Centring knife jigs from Tormek - Australian Wood Review
Tormek Long Knife Jig - Lee Valley Tools